| Inertia
Dynamics' Spring Applied Power-Off brakes are designed to decelerate or
park inertia loads when the voltage is turned off either intentionally or
accidentally, as in the case of a power failure. |
| |
 |
Flange
Mounted Spring Applied Brakes — Type FSB
Inertia Dynamics
type FSB brakes are designed to decelerate or hold inertial loads when the
voltage is turned off. These brakes can be mounted to a bulkhead or motor. |
 |
MPC
— Brake Only Module (Power-Off) with Output Shaft C-Face
The MPC is a power-off brake module with an output shaft.
The unit mounts on a C-Face motor and the output can be coupled to a C-Face
gear reducer. Ideal for creating brakemotor packages on smaller servo and
stepper frame motors. |
 |
Reverse
Mounted Spring Applied Brakes — Type FSBR
Inertia Dynamics type FSBR brakes are designed for applications
requiring minimum space (short axial length) or on motors with short shaft
extensions. When mounted, the armature hub is installed on the shaft first,
then the brake is installed over the hub and attached to the motor.
|
 |
Manual
Release, Spring Applied Brakes — Type FSBR
Inertia Dynamics features a type FSBR015 spring applied
brake with a manual release lever. The brake incorporates a lever which
is rotated to mechanically engage the clapper plate. The clapper plate acts
against the compression springs and allows the armature disc to spin freely.
The brake is now free of torque. An optional microswitch is activated on
the field assembly to disconnect power to your system in case of an accidental
start-up with the brake manually released. To return the brake to normal
operation, rotate the lever to re-engage the brake and produce torque. |
 |
Spring
Applied Brakes — Type SAB
Inertia Dynamics features a type SAB spring applied
brake. SAB brakes are designed to be engaged and disengaged in a static
condition at zero RPM. They are best used as a parking brake to hold a load
in position. These brakes can be mounted to a flange or motor using thru-holes
or tapped holes in the field cup. A conduit box is optional. SAB brakes
have been used extensively for servo brake applications. High temperature
coil insulations are available upon request. |
| |
| Click here for information on how to order Inertia Dynamics' Spring Applied Brakes. |
| |
| RETURN
TO PRODUCTS |
