 |
Shaft
Mounted Clutches — Type SL
SL/BSL series power-on clutches are used to couple two parallel shafts.
The armature hub assembly is mounted to the same shaft as the rotor assembly.
The armature hub accommodates a pulley, gear, sprocket, etc., to transmit
torque to the second shaft. The field assembly is mounted on the shaft and
retained by a loose fitting pin or bracket through the anti-rotation tab. |
 |
Shaft
Mounted Clutches — Type BSL
Inertia Dynamics
features five sizes of ball bearing clutches. All sizes have ball bearing
armature and field assemblies for heavy-duty applications, allowing higher
shaft speeds and side loads to be achieved. All BSL clutches are shaft mounted
for easy installation and operate in the same manner as our SL series clutches. |
 |
Shaft
Mounted Clutch Couplings — Type SO
SO series power-on clutch couplings are used to couple
two in-line shafts. The armature hub assembly is mounted to the load shaft
and the rotor assembly is mounted on the input shaft. The field assembly
is mounted on the input shaft and retained by a loose-fitting pin or bracket
through the anti-rotation tab. |
 |
Flange
Mounted Clutches — Type FL
FL series power-on clutches are used to couple two parallel
shafts. The armature hub assembly is mounted to the same shaft as the rotor
assembly. The armature hub accommodates a pulley, gear, sprocket, etc.,
to transmit torque to the second shaft. The field assembly is mounted to
a bulkhead that is perpendicular to the input shaft. |
 |
Flange
Mounted Clutch Couplings — Type FO
FO series power-on clutch couplings are used to couple
two in-line shafts. The armature hub assembly is mounted to the load shaft
and the rotor assembly is mounted on the input shaft. The field assembly
is mounted to a bulkhead that is perpendicular to the shaft. |
 |
Flange
Mounted Brakes — Type FB
FB series power-on
brakes are used to stop or hold a load that is coupled to the armature hub
assembly. The armature hub is attached to the load shaft. The field assembly
is mounted to a bulkhead that is perpendicular to the shaft. |
 |
Shaft
Mounted Clutches/Power-On Brakes — Type SLB and SOB
The
SLB and SOB series are shaft-mounted Clutch/Power-On Brake packages that
are used to couple two parallel or in line shafts. The
Clutch/Brake package combines the features of our model SL or SO with an
FB into one unit for easy installation. The
clutch armature hub accommodates a pulley, gear, sprocket, etc., to transmit
torque to the second shaft. The brake is used to stop or hold the load.
The
Clutch/Brake package is shaft mounted and retained by a loose-fitting pin
or bracket through the anti-rotation tab.
|
| |
| Click here for information on how to order Inertia Dynamics' Electromagnetic Clutches and Brakes (PDF, 56k) |
| |
| RETURN
TO PRODUCTS |
